Removal Procedure Of Outdoor Unit - Lennox LI012HI-210P432 Service Manual

Service Manual

11.2 Removal Procedure of Outdoor Unit

LI012HO-210P432
Steps
1.Remove cable cross plate 2 and valve cover
Remove 3 connection screw fixing small
cable cross plate 2 and then remove the
cable cross plate 2.
Remove 1 connection screw fixing valve cover
and then remove the valve cover.
2.Remove top cover
Remove connection screws connecting the
top cover plate with the front panel and the
right side plate,and then remove the top
cover.
3.Remove front grille
Remove connection screws between the
front grille and the front panel. Then remove
the front grille.
Installation and Maintenance
Warning: Be sure to wait for a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.
Procedure
front grille
Cable Cross Plate 2
screw
Valve Cover
top cover
71