Removal Procedure Of Outdoor Unit - Lennox LI018CI-180P432 Service Manual

11.2 Removal Procedure of Outdoor Unit

Steps
1. Remove big handle,valve cover and top cover
a
Remove the screw connecting the big handle and
right side plate, and then remove the big handle.
Remove the screw connecting the valve cover and
right side plate, and then remove the valve cover.
b
Remove the screws connecting the top cover with
outer case, right side plate and left side plate; lift
the top cover upwards to remove it.
2. Remove grille and outer case
Remove the 4 screws connecting the grille and
outer case, and then remove the panel grille.
68
Warning: Be sure to wait for a minimum of 20 minutes after
turning off all power supplies and discharge the refrigerant
completely before removal.
Procedure
grille
Service Manual
big handle
valve cover
top cover
Installation and Maintenance