Removal Procedure Of Outdoor Unit - Lennox LI012CI-180P432 Service Manual

11.2 Removal Procedure of Outdoor Unit

LI012CO-180P432 LI012HO-180P432
NOTE: Take heat pump for example.
Steps
1.Remove cable cross plate 2 and valve cover
Before disassamble.
Remove 3 connection screw fixing cable
cross plate 2 and then remove the Cable
cross plate 2.
Remove 1 connection screw fixing valve cover
and then remove the valve cover.
2.Remove top cover
Remove 3 connection screws among
top cover plate, front panel and right
side plate. Then remove top cover
plate.
82
Warning: Be sure to wait for a minimum of 20 minutes
after turning off all power supplies and discharge the
refrigerant completely before removal.
Procedure
Cable cross plate 2
top cover plate
screw
Valve Cover
screw
Installation and Maintenance
Service Manual