Diagnostics; The Wifi Network Name Is Not In The List Of Networks; The No Signal Icon Displays - NETGEAR Nighthawk M2 MR2100 User Manual

Diagnostics

To view diagnostics:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Mobile Router Status > DIAGNOSTICS.
The Diagnostics page displays.
The WiFi Network Name Is Not in the List of
Networks
If you do not see the mobile router's WiFi networks from your computer or mobile
device, try these suggestions:
• Refresh the list of networks.
• If the LCD is dark, the WiFi radio might be asleep. Tap the Power button to wake
the mobile router.
• If the mobile router is tethered to your computer, make sure that WiFi is set to stay
on when the mobile router is tethered. See Use the USB Type C Cable to Charge
Only on page 28.

The No Signal Icon Displays

If the No Signal icon ( ) displays on either the LCD or the mobile router web page,
make sure that you are in your network service provider's coverage area.
Troubleshooting
Nighthawk M2 Model MR2100
92 User Manual