Manage Website Filters - NETGEAR Nighthawk M2 MR2100 User Manual

4. Select SETTINGS > Setup > Router Setup.
The Router Setup page displays.
5. In the Use USB port for section, select Charge only.
6. Click the Apply button.
Your settings are saved.

Manage Website Filters

You can set up a filter to block or allow access to websites that you specify. You can also
set up a list of devices that are unrestricted. The website filtering does not apply to
unrestricted devices.
To set up a website filter:
1. From a computer that is connected to your network, launch a web browser.
2. Enter http://m.home or http://192.168.1.1.
A login page displays.
3. Enter the administrator login password.
The password is case-sensitive.
The dashboard displays.
4. Select SETTINGS > Security > Website Filters.
The Website Filters page displays.
5. Select the Enable check box.
6. In the Filter Type menu, select Block List or Allow List.
Depending on your selection, a Blocked Websites list or an Allowed Websites list
displays.
7. To add a website to the list, click the ADD button and enter the website.
The website is added to the list.
8. To edit an entry in the list, do the following:
a. Select its check box.
Edit icon.
b. Click the
c. Enter the changes.
Control Internet Access
Nighthawk M2 Model MR2100
47 User Manual