Cleaning Instructions - Panasonic CS-XU9UKH-8 Operating Instructions Manual

Cleaning instructions

To ensure optimal performance of the
unit, cleaning has to be carried out at
regular intervals. A dirty unit may cause
malfunction and you may see the nanoe
TECHNOLOGY indicator blinking or error
code "H99". Please consult authorised
dealer.
• Switch off the power supply and unplug
before cleaning.
• Do not touch the aluminium fi n, sharp parts
may cause injury.
• Do not use benzine, thinner or scouring
powder.
• Use only soap ( pH 7) or neutral
household detergent.
• Do not use water hotter than 40 °C / 104 °F.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Coils and fans should be clean
for at least every 6 months by
an authorised dealer.
Outdoor unit
Clear debris that surround the
unit.
Clear any blockage from drain
pipe.
Front panel
Wash gently and dry.
Remove the front panel
2 Pull out and lift up.
1 Release the hooks at
both ends.
ACXF55-17630_YZ0218-0.indb 33 ACXF55-17630_YZ0218-0.indb 33
Indoor unit
Front panel
nanoe-G Generator
Once every 2 weeks
• Clean with dry cotton bud.
• Do not touch during operation.
Air fi lters
Once every 2 weeks
• Wash/rinse the fi lters gently
with water to avoid damage to
the fi lter surface.
• Dry the fi lters thoroughly under shade, away
from fi re or direct sunlight.
• Replace any damaged fi lters.
Remove air fi lter
Close it securely
3 Close down.
4 Press both ends and center of the front panel.
Aluminium fi n
Air fi lters
nanoe-G Generator
Attach air fi lter
Insert into the unit
2 Push in.
1 Insert at
both sides.
1/9/2018 2:24:56 PM 1/9/2018 2:24:56 PM
33