Table of Contents
Advertisement
A. Taillamp Bulb
-
B. Back
Up
Lamp Bulb
5. Replace the bulb by pulling the old bulb out and gently
pushing the new bulb into the bulb holder socket.
6. Snap the bulb holder back into place, making sure all
retaining tabs are properly over the bulb holder tabs.
7. Reinstall the taillamp assembly by inserting the
outboard locating/retaining pins until the lamp is
seated. Secure with the inboard screws.
C. Turn Signal
Lamp Bulb
D. Stop/Taillamp Bulb
Windshield Wiper Blade Replacement
Windshield wiper blades should be inspected at least
twice a year for wear and cracking. See "Wiper Blade
Check" in the Index for more information.
Replacement blades come in different types and are
removed in different ways. For proper type and length,
see "Normal Maintenance Replacement Parts" in
the Index.
Here's how to remove the wiper blade:
1. Turn the wipers on to the lowest intermittent setting.
2. Turn off the ignition while the wipers are at the
outer position of the wipe pattern. The blades are
more accessible for removal/replacement while in
this position.
3. Pull the windshield wiper arm away from the
windshield or backglass.
6-43
Advertisement
Chapters
Table of Contents
