Intended Use; Safety Instructions; Using Your Appliance - Black & Decker GSTD2050 Original Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

ENGLISH

Intended use

Your BLACK+DECKER™ GSTD2050/GSTM2050 garment
steamer is intended for steaming fabrics.
Do not use this appliance for any other purpose. This
product is intended for indoor household use only.
This appliance is not intended to be used in:-
Staff kitchen areas in shops,Offices and other working
environments;
Farm houses,
By clients in hotels, motels and other residential type
environments;
Bed and breakfast type environments or any other
non-household environments.
Read all of this manual carefully before operating
the appliance

Safety instructions

Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric
shock, fire and/or serious injury.
The intended use is described in this manual. The use of
any accessory or attachment or the performance of any
operation with this appliance other than those
recommended in this instruction manual may present a
risk of personal injury.
Retain this manual for future reference.

Using your appliance

Always take care when using the appliance.
Never pull the power supply cord to disconnect the plug
from the socket. Keep the power supply cord away from
heat, oil and sharp edges.
Do not place the appliance on or near heat sources.
Do not use the appliance outdoors.
Always protect the motor unit from water or excessive
humidity.
If the power supply cord is damaged during use,
disconnect the appliance from the power supply
immediately. Do not touch the power supply cord before
disconnecting from the power supply.
Disconnect the appliance from the power supply when
not in use, before fitting or removing parts and before
cleaning.
Never let the appliance operate unattended.
Do not let the cord hang over the edge of a table,
counter, or touch hot surfaces.
Fully uncoil then guide the power supply cord neatly so it
6
(Original instructions)
cannot be caught accidentally, tripped over or cause any
other hazzard.
The appliance must not be located immediately below a
socket-outlet.
To prevent overload and blown fuses, do not plug other
appliance into same outlet (receptacle).
Don't touch the hot surfaces.
Always ensure that hands are dry before operating or
adjusting any switch on the product or touching the plug
and mains supply connections.
Do not use this appliance with a programmer, timer,
separate remote-control system or any other device that
switches the appliance on automatically, since a fire risk
exists if the appliance is covered or positioned incorrectly.
Do not store away until the appliance cools down, store
the appliance in cool dry location when not in use.
Always operate on a flat horizontal surface.
Do not insert or allow foreign objects to enter any
ventilation, exhaust opening or hose, as this may cause
an electric shock, fire or damage to the appliance.
To disconnect the appliance, switch it "OFF", then
remove the plug from outlet. Do not pull out the cord
because this could damage it.
The temperature of accessible surfaces may be high
during use and for some time afterwards.
To reduce the risk of electric shock, do not immerse the
appliance in water or other liquids.
Do not allow cord to touch hot surfaces. Let appliance
cool completely before storing away. Loop cord loosely
around appliance when storing.
Do not direct steam at people or animals, or use steamer
on garments while they are being worn.
Always disconnect appliance from electrical outlet when
filling with water, emptying, cleaning or when not in use.
Do not operate appliance with a damaged cord, or if the
appliance has been dropped or damaged. To reduce the
risk of electrical shock, do not disassemble or attempt to
repair the appliance, take it to a qualified service person
for examination and repair. Incorrect reassembly or repair
could cause a risk of fire, electric shock, or injury to
persons when the appliance is used.
Close supervision is required for any appliance used by
or near children. Do not leave the appliance unattended
while connected.
Always switch the appliance off and disconnect from the
mains before leaving for any amount of time.
Burns could occur from touching hot metal parts, hot
water or steam. Use care when you empty a steam
appliance, there may be hot water in the tank or inside
the appliance.
Fill water in water tank only and remove the water tank
only when it is empty.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gstm2050

Table of Contents