The Bowl Tools And Some Of Their Uses - Kenwood Chef Instructions Manual

slow speed outlet cover
bl
K-beater
bm
whisk
bn
dough tool
bo
spatula
bp
splashguard
bq
Optional attachments
There are a range of optional attachments
available to use with your Stand Mixer.
See the attachment leaflet included in your
pack or visit www.kenwoodworld.com
to see the full range and how to buy an
attachment not included in your pack.
Note: Slow Speed outlet attachments
The slow speed outlet on your Stand
Mixer model features the Twist Connection

The bowl tools and some of their uses

K-beater
For making cakes, biscuits, pastry, icing,
fillings, éclairs and mashed potato.
Dough Tool
For yeast mixtures only.
Whisk
For eggs, cream, batters, fatless sponges,
meringues, cheesecakes, mousses,
soufflés. Do not use the whisk for heavy
mixtures (e.g. creaming fat and sugar) -
you could damage it.
To use your bowl tools
1 Turn the head lift lever anti-clockwise and
raise the mixer head until it locks
Ensure the bowl seating pad
correctly fitted with the
uppermost.
2 Fit the bowl on the base, press down and
turn clockwise
3
3 Place the required tool into the socket.
.
2
is
9
symbol
to secure in position.
System. It is designed to accept Twist
Connection System attachments.
When purchasing new attachments for
the slow speed outlet you should check
compatibility with your Stand Mixer. All
Twist Connection System attachments can
be identified by the product code which
starts with KAX and also by the Twist logo
which is visible on packaging. For more
information visit www.kenwoodworld.com/
twist.
If you own attachments featuring the Bar
Connection System
use the KAT002ME adaptor to connect
these to the Twist Connection System
on your Stand Mixer.
For more information visit
www.kenwoodworld.com/twist.
Then push up
lock into position.
Note: If the K-beater or Whisk are not
picking up ingredients from the bottom
of the bowl refer to the "Tool Adjustment"
section.
4 Lift the mixer head slightly then turn the
head-lift lever anti-clockwise and lower
the mixer head until it locks.
5 Start the machine by turning the speed
control to the desired speed setting.
6
Use the pulse (P) position for short
bursts of maximum speed.
6 After use, return the speed control to
'O' OFF position and unplug your Stand
Mixer.
7 Release the tool by turning clockwise
to unlock from the tool socket and then
remove.
Important
Ensure that no bowl tools are fitted or
stored in the bowl when using other
outlets.
5
you will need to
and turn the tool to
4 5