Know Your Stand Mixer - Kenwood Chef Instructions Manual

This appliance shall not be used by children. Keep the
l
appliance and its cord out of reach of children.
The maximum rating is based on the mini chopper/mill
l
attachment that draws the greatest load. Other attachments
may draw less power.
Only use the appliance for its intended domestic use.
l
Kenwood will not accept any liability if the appliance is subject
to improper use, or failure to comply with these instructions.
Before plugging in
• Make sure your electricity supply is the same as the one shown on the underside of your
appliance.
Important – Plug and Fuse Information
• The wires in the cord are coloured as follows:
Blue = Neutral
Brown = Live
If the plug supplied with your appliance has a fuse fitted and the fuse fails it must be
l
replaced with one of the same rating.
• If the plug or cord requires replacing a new cord set should be fitted by an Authorised
Kenwood Repairer.
Note:
• For non-rewireable plugs the fuse cover MUST be refitted when replacing the fuse. If the
fuse cover is lost then the plug must not be used until a replacement can be obtained.
The correct fuse cover is identified by colour and a replacement may be obtained from
your Kenwood Authorised Repairer (see Service).
• If a non-rewireable plug is cut off it must be DESTROYED IMMEDIATELY. An electric
shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into
a socket outlet.
• This appliance conforms to EC Regulation 1935/2004 on materials and articles intended
to come into contact with food.
before using for the first time
• Wash the parts: see 'care and cleaning' section.

Know your Stand Mixer

Key
Attachment outlets
high-speed outlet
1
slow-speed outlet
2
bowl tool socket
3
Mixer
high speed outlet cover
4
mixer head
5
speed and pulse control
6
power unit
7
head release lever
8
bowl seating pad
9
bowl
bk
4