Table of Contents
Advertisement
1. Open the dispense nozzle and point it into the fill
port or a container.
2. Activate the meter.
3. Press Reset to clear the prior total.
4. Accept the default preset or adjust the preset value.
5. Dispense by squeezing the trigger toward the valve
body (F
. 4).
IG
F
. 4
IG
6. Press the trigger latch button to lock the trigger
valve in the open position (F
7. Slowly release the trigger while pressing the trigger
latch button (F
. 5).
IG
F
. 5
IG
3A8307D
. 5).
IG
8. To stop dispensing before the Preset amount is
reached, release the trigger latch by pulling the
trigger toward the valve body, and releasing the
trigger (F
. 6 and F
IG
9. Close the nozzle when the dispense is completed.
F
. 6
IG
F
. 7
IG
Operation
. 7).
IG
13
Advertisement
Table of Contents
