D2 (bit2)
Enable mode that picture mode will be set in
forced when turning the main power ON
D1 (bit1) ~
Forced picture mode
D0 (bit0)
LED Indications
The LEDs on the TV (at the bottom of the TV) indicate the TV's status, as described below.
There are 3 LEDS (from left to right): PowerOn/Standby, OnTimer, ProgramTimer.
PowerOn/Standby LED
Red ON (solid) = The TV power cord is plugged in, but TV is in Standby.
Green ON (solid) = The TV is powered on.
OnTimer LED
Green ON (solid) = The OnTimer is set.
ProgrammeTimer LED
Enable
Disable
(Display
language only)
0 [dec]: Auto View (Normal)
1 [dec]: Dynamic
2 [dec]: Standard
3 [dec]: Movie