Advertisement
To select menu, press P
or P
table data.
To move the cursor in the adjustment, press
1. By pressing P
or P , following table data setting will change the value either 1 or 0
on selected items as follows;
OPT2
OPT2
FUNCTION DESCRIPTION
D7 (bit7)
Enable mode that TV standby will be
appeared in forced when turning the
main power ON
D6 (bit6)
Enable mode that TV On will be
appeared in forced when turning the
main power ON
D5 (bit5)
FRONT Key
D4 (bit4)
All keys except input selector key
(Video/TV)
D3 (bit3)
User remote control operation
D2 (bit2)
Disable SET UP MENU except
and press OK to enter the adjustment menu of following
+ or
-.
Enable
(This function is ignored
when D6 is set to 1.)
Enable
Disable
Disable
Disable
(Only setting of Service
mode and Super User mode
are possible.)
Disable
0
1
(Normal)
Disable
Disable
Enable
Enable
Enable
Enable
Advertisement
