Advertisement
Adjusting the Data
Pressing of VOLUME
+/- button will change the value of data in the range from 00H to
FFH. The variable range depends on the adjusting item.
Setting TVOP
Enter to service mode and select menu of TVOP by pressing P
or P
during display of
adjustment menu. After selecting TVOP, press
+ or
- to set I2C check function to
disable or enable as below.
TVOP
FUNCTION DESCRIPTION
1
0 (Normal)
D5 (bit5) I2C check between TV-Micro and Standby-Micro (WDT) Disable Enable
Setting Panel Option Data
For a complete list of OPT4 data values corresponding to the model, see MODEL ID
TABLE.
Enter to service mode and select menu of OPT4 by pressing P
or P
during display of
adjustment menu. After selecting OPT4, press
+ or
- to set OPT4 value as table
below.
Advertisement
