Specifications - Sony WRT-8P Operating Instructions Manual

Uhf synthesized transmitter
Hide thumbs Also See for WRT-8P:
Table of Contents

Advertisement

Specifications

Transmitter and modulator section
Oscillator
Carrier frequencies
Operating frequency band
RF power output
Tone signal
Battery condition signal
Pre-emphasis
Deviation
Maximum deviation
Audio input attenuation
Audio input pad
Frequency response
Signal-to-noise ratio
Power section
Power requirements
Battery life
General
Operating temperature
Storage temperature
Dimensions
Mass
Supplied accessories
Design and specifications are subject to change without notice.
0 dBV = 1 Vrms
Crystal controlled PLL synthesizer
758.125-781.875MHz (U6264 model)
782.125-805.875MHz (U6668 model)
24 MHz
250 mW/50 mW
32.768 kHz
32.782 kHz
50 µs
+/- 10 kHz (–60 dBV, 1 kHz input, MIC)
+/- 10 kHz (-18 dBu, 1 kHz input, LINE)
+/- 40 kHz
0 to 20 dB (MIC, LINE)
40dB(LINE)
50 to 18,000 Hz
60 dB or more (A-weighted, modulation frequency 1 kHz,
with +/- 10 kHz deviation at tuner)
9.0 V DC (one 6LR61, alkaline battery)
Approx. 2.5 hours at 25°C(77° F )
with Sony 6LR61 alkaline battery (250 mW)
Approx. 4 hours at 25°C(77° F )
with Sony 6LR61 alkaline battery (50 mW)
0 C to 50 °C (32 ° F to 122 ° F)
-30 °C to 60 °C(-22 ° F to 140 ° F)
44 x 106 x 44 mm (w/h/d)
Approx. 230 g (including battery)
Operating Instructions (1)
Sony Wireless Microphone System Frequency List (1)
Soft case (1)
17

Advertisement

Table of Contents
loading

Table of Contents