Lloyd's LC-1243 Quick Manual page 26

14. Add device
Open the Lloyds Smart App, select "+" (upper right corner) (1), choose the type of device
that you want to add, in this case, go to "Security" (2), and then click on "Smart Lock" (3).
Enter your Wi Fi network information and password, click "Next" (4). Once the lock is installed
and you have configured at least one administrator from the numeric panel, press the "*"
key, then the "3" key followed by the "#" key on the front handle of the lock, you will hear the
melody 'G, F, E, D, C' and you will need to verify the administrator by entering the password
that has been enabled for it. The lock buttons and LED light will start flashing rapidly, please
confirm in the App (5).
26
4
1
2
3
5
Wait for the device to finish
configuring