Lean Cars GTS1188 Installation And Operation Manual page 4

1. insert the back axis，assemble the gear motor &
Axle sleeve，assemble back wheels， fix the
wheels(2XM8 NUT&3X10MM GASKET）
3.Install bumper(4X(4X10)SCREW)
5.Insert handlerbar into the axial shaft ,secure
with(1XM10 NUT)
7.CONNECT THE MOTOR ELECTRIC LINE INTO THE
MOTOR
2.fix the front wheel(2XM8 NUT&4X10MM GASKET)
4.Flip the car bottom up,then insert steering shaft
6.OPEN THE SEAT
8.CONNECT THE BATTERY ELECTRIC LINE INTO
THE BATTERY