Page 1
3147A-PINNACLE1 The following FCC and ISED regulatory information applies to the Pinnacle 100 module which is hosted by the MG100. Note: Laird Connectivity is the manufacturer for all of the antennas listed below. Table 1: Pinnacle 100 certified antennas Peak Gain...
Page 2
WARNING: The OEM must ensure that FCC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Laird Connectivity FCC identifier for this product. Contains FCC ID: SQG-PINNACLE1 Thee following FCC part 15.19 statement must also be available on visible on outside of device: The enclosed device complies with Part 15 of the FCC Rules.
Page 7
Declaration: We, Laird Connectivity, declare under our sole responsibility that the essential radio test suites have been carried out and that the above product to which this declaration relates is in conformity with all the applicable essential requirements of Article 3 of the Radio Equipment Directive 2014/53/EU, when used for its intended purpose.
Need help?
Do you have a question about the Sentrius MG100 and is the answer not in the manual?
Questions and answers