Table of Contents
Advertisement
2. Hold and turn the separator clockwise. Remove it from the dust container
3. Clean the cyclone filter with a dry cloth
4. Return the cyclone filter to the dust container, ensuring to lock it back into place by
turning it counter clockwise.
NB: Please ensure to clean all the filers after each use. Using the machine with
damp filters could damage the motor so, please ensure that only completely
dry filters are placed back into the vacuum cleaner after they have been
washed. Wet or damp filters attract dust which restricts airflow. This causes
the motor to overheat, which in turn shortens the lifespan of the vacuum
cleaner.
Note: The Brush Roller needs to be checked on a regular basis and any pieces
of string or debris should be removed to ensure that the product does not get
damaged.
TROUBLE SHOOTING
FAULT
Loss of suction power
CAUSE
Dust Container is full
of debris
ACTION
Empty the canister
following Section A. in
General Cleaning &
Maintenance
Advertisement
Table of Contents
