Part Numbers - Mercury 2005 Mountaineer Owner's Manual

Maintenance and Specifications
3. Add only enough fluid through
the filler opening so that the fluid
level is at the bottom of the
opening.
Use only fluid that meets Ford specifications. Refer to Lubricant
specifications in this chapter.
DRIVELINE UNIVERSAL JOINT AND SLIP YOKE
Your vehicle may be equipped with universal joints that require
lubrication. Refer to the scheduled maintenance information for
maintenance intervals. If the original universal joints are replaced with
universal joints equipped with grease fittings, lubrication will also be
necessary.
MOTORCRAFT PART NUMBERS
Component
Air filter element
Fuel filter
Battery
Oil filter
PCV valve
Spark plugs
1
The PCV valve is a critical emission component. It is one of the items
listed in scheduled maintenance information and is essential to the
life and performance of your vehicle and to its emissions system.
For PCV valve replacement, see your dealer or a qualified service
technician. Refer to scheduled maintenance information for the
appropriate intervals for changing the PCV valve.
Replace the PCV valve with one that meets Ford material and
design specifications for your vehicle, such as a Motorcraft or
equivalent replacement part. The customer warranty may be void
for any damage to the emissions system if such a PCV valve is not
used.
286
2005 Mountaineer (mnt)
Owners Guide (post-2002-fmt)
USA (fus)
4.0L SOHC V6 engine 4.6L 3V V8 engine
FA-1695
2C5E-9155-BB
BXT-65-650
FL-820S
1
2
FA-1695
2C5E-9155-BB
BXT-65-650
FL-820S