If your vehicle slows down more
than 16 km/h (10 mph) below your
set speed on an uphill, your speed
control will disengage. This is
normal. Pressing = will re-engage it.
Do not use the speed
control in heavy traffic or
on roads that are winding,
slippery, or unpaved.
To set a higher set speed
Press and hold +. Release the
control when the desired vehicle
speed is reached or
Press and release + to operate
the Tap-Up function. Each press
will increase the set speed by 1.6
km/h (1 mph) or
Accelerate with your accelerator
pedal. When the desired vehicle
speed is reached, press and
release +.
You can accelerate with the accelerator pedal at any time during speed
control usage. Releasing the accelerator pedal will return your vehicle to
the previously programmed set speed.
Driver Controls
63