Mercury 2002 Cougar Owner's Manual page 21

AM/FM select
The AM/FM select control works in
radio and CD modes.
To gain the best reception, always
tune to the strongest station signal available.
Under most conditions, the AM frequency provides stable sound quality
and little signal disturbance. However, at night, atmospheric conditions
may sometimes lead to interference from other stations.
The FM frequency offers higher quality sound broadcasts, but signal
strength can be subject to interference caused by:
Limited range of some transmitters.
Reception distortion as signals reflect off local buildings and other
objects.
Signal "dead spots" where reception is obstructed or restricted.
AM/FM select in radio mode
This control allows you to select AM or FM frequency bands. Press the
control to switch between AM, FM1 or FM2 memory preset stations.
AM/FM select in CD mode
Press this control to stop CD play and begin radio play.
Tune adjust
The tune control works in radio mode and allows you to manually adjust
the frequency tuning.
Tune adjust in radio mode
Press the MENU control until
MAN appears in the display.
Press on the SEEK control to
move down the band (whether or not a listenable station is located
there). Hold the control to move through the frequencies quickly.
Press on the SEEK control to move up the frequency up the band
(whether or not a listenable station is located there). Hold for quick
movement.
Entertainment Systems
CD AM/FM
MENU
21