Mercury 1997 Cougar Manual page 32

momentarily on the stations being set into the
memory buttons. The radio is now in the
"AUTO" mode and the display will show
"AUTO" each time a preset is activated.
NOTE: If there are fewer than five strong
stations in the frequency band, the
remaining unfilled buttons will store
the last strong station detected on the
band.
After all stations have been filled, the radio will
begin playing the station stored on memory
button 1.
To deactivate the Auto Memory Store mode and
return to the manually-set memory button
stations (or those stations set using Auto
Memory Load), simply push the "AUTO
PRESET" button. Display will show "AUTO"
then "OFF." The next time Auto Memory Store
is activated on that band, the radio will store the
next set of five strong stations.
Adjusting the tone balance and speaker
output of your radio
Increasing or decreasing bass response
Push the "AUDIO" button repeatedly until
the display reads "BASS". Push the top (+)
side of the "VOLUME" button to increase
bass (more "lows"), and push the bottom (-)
side to decrease bass (less "lows").
Increasing or decreasing treble response
Push the "AUDIO" button repeatedly until
the display reads "TREB". Push the top (+)
side of the "VOLUME" button to increase
treble (more "highs"), and push the bottom
(-) side to decrease treble (less "highs").
30