Mercury 1996 Cougar Manual page 140

Using the "SCAN" function
Press the "SCAN/TUNE" button to enter the
scan mode. Once in the scan mode, press the top
a or bottom b half of the "SEEK" button to
scan forward or reverse, respectively. The CD
player will begin scanning the disc, stopping on
each listenable track for approximately eight
seconds. This continues until you press the
"SCAN/TUNE" button a second time. While in
the scan mode, the display shows the current
sampled track number.
Special features of your CD player
Compression
The compression feature will bring soft and
loud passages closer together for a more
consistent listening level.
To turn the compression on, press the
"COMP" button. When on, the compression
indicator ("C") will appear in the display.
Press the button again to turn off.
Automatic Disc Storage
If the disc is ejected from the CD player but
is not removed from the disc opening within
approximately 10 seconds, the player will
automatically reload the disc for storage,
unless the disc is automatically ejected due to
a "focus error" (disc inserted upside down).
In this case, the disc will not be automatically
reloaded.
How to eject the disc
Push the "EJECT" button to stop play, eject the
disc and resume radio operation of your audio
system.
NOTE: You can eject the disc while the radio
power and/or ignition is on or off.
140