Protecting The Environment - Black & Decker BXAC40008GB Manual

Hide thumbs

Table Of Contents

Table of Contents

Cleaning and maintenance

WARNING: Before cleaning and maintenance,

switch the appliance off and remove the plug from

the socket, to prevent electric shock.

Note! Always unplug the unit from the mains before

cleaning.

Note! Clean the unit regularly to ensure optimal

performance.

Cleaning the Housing

♦

To clean the unit's housing, wipe it down with a

soft, damp cloth.

♦

Never use aggressive chemicals, gasoline,

detergents, chemically treated cloths or other

cleaning solutions to clean the unit, as this may

cause damage to its components.

Cleaning the Filter

♦

To clean the filter, tap it lightly or use a vacuum

cleaner to remove loose dust and dirt from its

surface.

♦

Once it is dust and dirt-free, rinse the filter

thoroughly under running water, at a temperature

of no more than 40 degrees centigrade.

♦

Dry the filter thoroughly before placing it back into

the unit.

Note! NEVER attempt to operate the unit without the

filters.

Before storing the unit:

♦

Drain any water inside the tank.

♦

Operate the unit in ventilation only mode for a few

hours to thoroughly dry the interior.

♦

Clean or change the filter.

♦

Unplug and store the power cord.

♦

Place the unit back into its original box.

♦

You can now safely store the unit.

(Original instructions)

Mains plug replacement

WARNING: The following section on mains plug

replacement is for authorised service centre persons

only.

If a new mains plug needs to be fitted:

♦

Safely dispose of the old plug.

♦

Connect the brown lead to the live terminal in the

new plug.

♦

Connect the blue lead to the neutral terminal.

♦

If the product is class I (earthed), connect the

green/yellow lead to the earth terminal.

Note! If your product is class II double insulated

(only 2 wires in the cord set), no connection is to be

made to the earth terminal.

Follow the fitting instructions supplied with good

quality plugs. Any replacement fuse must be of the

same rating as the original fuse supplied with the

product.