Tcs Indicator Light - Mazda 2004 MAZDA6 Owner's Manual

J56J_8S11-EA-03G_Edition1.book Page 37 Tuesday, June 24, 2003 6:29 PM
M Shift Position Indicator Light
(Automatic Transaxle)
This indicates the selected shift position
when the ignition switch is in the ON
position.
Gear position indicator
In manual mode, the "M" of the shift
position indicator illuminates and the
numeral for the selected gear illuminates
in the gear position indicator.
Form No. 8S11-EA-03G
Warning/Indicator Lights and Beep Sounds
M TCS Indicator Light*
This indicator light stays on for a few
seconds when the ignition switch is turned
to the ON position. If the TCS is
operating, the indicator light flashes.
If the light stays on, the TCS may have a
malfunction and it may not operate
correctly. Take your vehicle to an
Authorized Mazda Dealer.
NOTE
• In addition to the indicator light
• On slippery surfaces, such as fresh
Driving Your Mazda
flashing, a slight lugging sound will
come from the engine. This
indicates that the TCS is operating
properly.
snow, it will be impossible to
achieve high rpm when the TCS is
on.
*Some models.
5-37