Lincoln 2001 LS Owner's Manual page 35

Controls and features
Temperature conversion
Press the Fahrenheit/Celsius (°F °C)
EXT
control to switch between Fahrenheit
C
and Celsius temperature on the
,
F C
DATC display only. The set point
temperatures in Celsius will be
displayed in half-degree increments.
The English/Metric control on the
AUTO OFF
trip computer and message center
(if equipped) will not change the
DATC temperature display. Refer to Electronic Message Center in the
Instrumentation chapter.
Fan speed ( )
EXT
A/C
F F
F C
R
AUTO OFF
When AUTO is pressed, fan speed is adjusted automatically for existing
conditions. You can override fan speed at any time. To control fan speed
manually, press the fan control to cancel the automatic fan speed
operation. Press the control up for higher fan speed or down for lower
fan speed. The display will show and a bar graph to indicate manual
fan speed operation and relative speed.
When the fan is adjusted in the AUTO mode, the AUTO indicator will
remain lit and the system will remain in auto operation.
To return to automatic fan operation, press AUTO. The fan icon and bars
will disappear from the display, and the DATC system will return to full
automatic operation.
35