Lincoln 2001 LS Owner's Manual page 33

Controls and features
engine is not warm enough to provide heat, the fan will operate at a low
speed and the airflow will be directed to the windshield or to the floor.
In 3 1 ⁄ minutes or less, the fan speed will start to increase and the airflow
2
location will change to the floor area.
When in AUTO mode, the DATC system automatically controls the air
conditioning operation, the fan speed, the airflow direction and determines
whether outside or recirculated air is required. Manual control of the A/C,
air recirculation and fan speed are available in auto mode.
If unusual conditions exist (i.e.-window fogging, etc.), the manual
override controls allow you to select airflow locations as necessary. To
return to full automatic control, press the AUTO control.
DATC system AUTO temperature balance
EXT
A/C
F F
F C
R
AUTO OFF
Press and hold the AUTO control for about two seconds to equalize the
passenger set temperature with the driver side temperature. This feature
is useful when the driver is alone in the vehicle.
Driver side temperature selection
EXT
A/C
F F
F C
R
AUTO OFF
The display window indicates the selected temperature and manual
control of fan speed ( ) if automatic fan speed is not desired.
33