Advertisement
Advertisement
Table of Contents
Related Manuals for Xiaomi Mi 4K Laser Projector 150”
Summary of Contents for Xiaomi Mi 4K Laser Projector 150”
- Page 1 Mi 4K Laser Projector 150” User Manual...
-
Page 2: User Notice
User Notice Thank you for choosing the Mi 4K Laser Projector 150". Read this manual carefully before use, and retain it for future reference. Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. Actual product and functions may vary due to product enhancements. -
Page 3: Laser Safety Information
Laser Safety Information Laser Information Label Caution Do not stare into the beam The product complies with IEC 60825-1:2014 Class 1 and RG2 IEC 62471-5:2015. As with any bright light source, do not stare into the beam, RG2 IEC 62471-5:2015 Safety Instructions Before using the product, please carefully read the following safety instructions. - Page 4 Grounding Warning: This product must be grounded when in use. Transportation Instructions: It is recommended to transport this projector in its original or similar packaging. Preventing Electric Shocks and Fire Hazards: - Using an incorrect power cord may result in decreased product performance and even electric shock or fire. To ensure the projector's performance and safety, only use its original power cord or an identical replacement.
- Page 5 - Do not place this projector in an upright position, as it may fall over and cause injury or damage. - Do not expose this projector to rain or moisture (operating humidity is 20%–80%). - Do not immerse this projector in, nor expose it to water or other liquids. Immediately unplug the projector if any liquid or object got into its housing, and have it checked by a qualified technician before using it again.
-
Page 6: Package Contents
Package Contents When opening the packaging, check the contents of the box against the list below. If there is anything missing, please contact the seller in time. Laser Projector Remote Control Power Cord Mi 4K Laser Projector 150” User Manual WARRANTY NOTICE Mi 4K Laserprojektor 150’’... -
Page 7: Product Overview
Product Overview Exterior Vents USB 2.0 Port Height Adjustable Wheel (Right) Projection Lens Human Body Detection Power Indicator Heat Dissipation Vents Height Adjustable Wheel (Le Metal Speaker Grille Caution - Do not place any flammable objects nearthe heat dissipation vent. - Do not place any objects near the vents, as this may cause heat to build up inside the projector. - Page 8 Connection Ports Power Port Supports USB 2.0 communication protocol Audio output port (supports subwoofers) HDMI input port 1 HDMI input port 2 AV input port (3.5 mm composite AV port) HDMI input port 3 Optical digital audio signal output port Audio return channel port Ethernet port...
- Page 9 Power Indicator Power Indicator The power indicator (a white light) to the corresponding projector's status is as follows: - Connect to the power outlet, the projector automatically turns on. - The indicator blinks when the projector is turning on. - The indicator turns off a er the project is turned on. - The indicator blinks when the projector is turning off.
- Page 10 Remote Control Power Bu on: When the projector is turned Google Assistant: off, press to turn on. When the Press the Assistant bu on on your remote projector is on, press to select to talk to Google Assistant Power off, Restart, Bluetooth OK: Confirm the selected option or se ing speaker mode or Screenshot.
- Page 11 Projection Distance & Screen Size Projection screen Projection screen Determine the distance between the projector and the wall or screen according to the desired screen size. Screen Dimensions (SD): Projection Distance (D) Relative Height (H) Screen Dimensions (SD) The diagonal size of the projection screen (in inches). 80"...
- Page 12 Suspended Ceiling Installation Suspended ceiling installation is one of the installation methods that you hang the projector in an overhead location, for example, on a high ceiling, through a ceiling mount. A projector supporting suspended ceiling installation has threaded holes on the bottom, you can install the project on the mount by attaching the screws into the holes.
- Page 13 Quick Start Guide Pairing the Remote 20 cm A er installing the ba eries Place the remote control close to the bo om right A notification will appear on the in the remote control, press corner of the projector, then simultaneously press projected image once the remote the OK bu on to start pairing.
- Page 14 Image Focus Keystone Correction Go to Se gs > Image > Focus, press the le ht bu on To perform keystone correction, go to Se gs > Image > on the remote control to manually fine tune. Keystone Correction. Use the Le ht remote bu ons to select 8-Point Keystone Correction, Fine Tune, or Reset.
- Page 15 Network & Internet Smart Temperature Control Go to Settings > Network & Internet. Select a wireless network The projector automatically monitors the ambient temperature to connect to, enter the password, and wait for the projector to (operating temperature range is 0°C to 40°C), projector connect.
- Page 16 Safety & Protection The projector comes with an infrared sensor which is able to intelligently detect and protect the human eye from damage caused by strong light within the projected area. The projector will reduce its brightness to the lowest possible value when the sensor is triggered and issue the following notification: "Do not look directly at the light source."...
- Page 17 Bluetooth Speakers The projector has four high-quality built-in speakers with a total output of about 30 W. The speakers can also be used as a standalone Bluetooth stereo. Tweeter Full Range Speakers Full Range Speakers Tweeter To use speakers as the Bluetooth stereo, press the Home button, then select Settings > Remotes & Accessories > Bluetooth speaker mode from the home screen.
-
Page 18: Care And Maintenance
Care & Maintenance Heat Dissipation Maintenance Inlet Outlet Note: Do not touch the heat dissipation vent or 50 cm 50 cm ventilation vents as temperatures can reach up to 65°C. Note: Do not place any objects within 50 cm of the projector’s air vents, as this will affect its heat dissipation effect. Cleaning &... -
Page 19: Specifications
Specifications Name Mi 4K Laser Projector 150” Model XMJGTYDS01FM Basic Information Item Dimensions 410 × 291 × 88 mm Net Weight 7.0 kg Power Consumption < 300 W (High Brightness Mode) Electrical Specifications Rated Input 100–120/200–240 V ~, 3/2.5 A, 50/60 Hz Standby Power Consumption <... - Page 20 Audio Effects Dolby Audio/DTS-HD Speaker Audio Speaker Full Range × 2/Tweeters × 2 Power Supply Built-in Power Supply Built-in AC-DC, DC-DC Smart Temperature Control Automatic Brightness Adjustment/Smart Fan Speed Adjustment Safety & Protection Temperature Switch Overheating Auto Turn-off Laser Projector Eye Protection Human Body Detection Sensor (can be disabled) Noise Level ≤32 dB (View mode at an ambient temperature of 25°C)
-
Page 21: Troubleshooting
Troubleshooting Fault Solution No projected image Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector. Android system crashes Turn off the projector and disconnect from the power, then plug in the power cord and turn on the projector. Screen display error Turn off... -
Page 22: Product Certifications
The Bluetooth® word mark and logos are registered trademarks Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio, and the double-D symbol are owned by Bluetooth SIG, Inc. and any use of such marks by [Xiaomi trademarks of Dolby Laboratories.