Vtx A8 Sb For Pull-Back - JBL VTX Series Rigging Manual

12.3 VTX A8 SB FOR PULL-BACK

The primary role of the VTX A8 SB Suspension Bar is as a pull-back attachment at the bottom of an array for configurations requiring
a significant amount of downtilt. In this case, the VTX A8 AF connects to the primary suspension point at the top of the array, with the
VTX A8 SB mounted to the bottom of the array and lifted by a second motor point at the rear of the array. The two motors are adjusted
to achieve the desired array downtilt.
STEPS:
• Follow the steps in chapter 9 – Deploying Standalone A8 Systems to suspend the VTX A8 array using the hoist attached to
1
the Array Frame.
• Make sure the Suspension Bar attachment tabs have been extended to their operating positions, so the SB can be connected
2
to an A8 cabinet.
• Use the VTX A8 quick release pins to attach the Suspension Bar to the lowest VTX A8 in the array.
3
• Attach the hoist to the center shackle position of the Suspension Bar and lift the array.
4
1
VTX A8 | Rigging Manual
58
2
3
4