JBL VTX Series Rigging Manual page 53

Once the VT has been disconnected from the flown array of B18s, the first cluster of A8 cabinets can be added to the array. Note that
the first VTX A8 connected to a B18 subwoofer is always pinned to the 4° position. This allows the top A8 cabinet to sit parallel with the
Array Frame.
STEPS:
• Raise the suspended cluster of VTX B18s cabinets and align the A8 cart of cabinets below the suspended cluster.
1
2
• Once the clusters are aligned, carefully lower the suspended cluster until the front or rear attachment points are nearly touching.
Check that the attachment points are aligned, then lower the suspended cluster until the front or rear attachment points join.
• Lower the array and insert the quick release pins. Add additional A8 clusters until the array is fully built.
3
1
VTX A8 | Rigging Manual
2
53