Section 1 Product overview
The Intellical PHC108 pH probe is a digital, combination electrode with a cone-shaped glass sensor
that measures the pH of semi-solid samples, emulsions and slurries (e.g., soil, mud, sludge, foods).
The probe is non-refillable and has a built-in temperature sensor, ceramic pin and open reference
junctions. Refer to
Figure
Note: Do not use the probe to measure the pH of organic solvents, low ionic strength samples or very alkaline
samples.
Figure 1 Probe overview
1 Probe soaker bottle with storage solution
2 Cable
Section 2 Specifications
Specifications are subject to change without notice.
Specifications
Probe type
pH range
pH accuracy
Reference type
Reference junction
Slope
Isopotential point
Sodium (alkalinity) error
Temperature accuracy
1.
Details
Digital combination pH probe with non-refillable polymer electrolyte,
cone-shaped tip and built-in temperature sensor
2 to 12 pH
±0.02 pH
Ag/AgCl
Ceramic pin and open junctions
–59 mV/pH (85 to 115% at 25 °C (77 °F) per Nernstian theoretical
value)
0 (±30) mV at 7.0 (±0.5) pH
<0.1 pH at pH >11 in 0.1 M NaCl
±0.3 °C (±0.54 °F)
3 Reference junction
4 Glass sensor and temperature sensor
English 3