Hyundai 2008 Accent Owner's Manual page 127

B720A02E-AAT
DEFROSTING/DEFOGGING
Use the heating/ventilation system to defrost or defog the
windshield:
To remove interior fog on the windshield;
o Set the air flow control to the defrost (
A/C will turn on automatically and the "Fresh" mode will
be activated.)
o Set the temperature control to the desired position.
o Set the fan speed control between "1" and "4" position.
NOTE:
When the A/C is operated continuously on the floor-defrost level (
on the exterior windshield. If this occurs, set the air flow control to the face level position (
to the low position.
B720A02MC-1
To remove frost or exterior fog on the windshield;
o Set the air flow control to the defrost (
A/C will turn on automatically and the "Fresh" mode will
be activated.)
) position. (The o Set the temperature control to warm.
o Set the fan speed control to position "3" or "4".
FEATURES OF YOUR HYUNDAI
) or defrost level ( ), it may cause fog to form
) and fan speed control
1 1
FEATURES OF YOUR HYUNDAI
115
115
B720B02MC-1
) position. (The