Hyundai 2008 Accent Owner's Manual page 79

B260N01MC-AAT
Malfunction Indicator Light
This light illuminates when there is a
malfunction of an exhaust gas related
component and the system is not func-
tioning properly. This light will also illumi-
nate when the ignition key is turned to the
"ON" position, and will go out in a few
seconds after the engine is started. If it
illuminates while driving, or does not illumi-
nate when the ignition key is turned to the
"ON" position, take your car to your nearest
authorized Hyundai dealer and have the
system checked.
!
CAUTION:
Prolonged driving with the Emission
Control System Malfunction Indicator
Light illuminated may cause damage to
the emission control systems which
could effect drivability or fuel economy.
If the Emission Control System Malfunc-
tion Indicator Light begins to flash ON
and OFF, potential catalytic converter
damage is possible which could result in
loss of engine power. Have the Engine
Control System inspected as soon as
possible by an authorized Hyundai
dealer.
FEATURES OF YOUR HYUNDAI
FEATURES OF YOUR HYUNDAI
B265E01MC-AAT
Seat Belt Warning Light
and Chime
The driver's seat belt warning light and
chime will activate to the following table
when the ignition switch is in "ON" posi-
tion.
Conditions Warning Pattern
Seat Belt Vehicle Speed Light-Blink Chime-Sound
Unbuckled 6 seconds
6 seconds
Buckled
Buckled → → → → → Unbuckled
6 seconds
Above 6mph
6 seconds *1)
(10 km/h)
↓
Unbuckled
Below 3mph
Stop *2)
(5 km/h)
*1) Warning pattern repeats 11 times with
interval 24 seconds. If the driver's seat
belt is buckled, the light will stop within
6 seconds and chime will stop imme-
diately.
*2) The light will stop within 6 seconds
and chime will stop immediately.
1 1
67
67
None
↓