Hyundai 2007 Accent Owner's Manual page 157

Table of Contents

Advertisement

M465F01MC-AAT
1. LOAD Button
This compact disc player will accommo-
date up to six compact discs.
To insert multiple discs into the player,
perform the following:
1. Press and release the LOAD Button.
2. Green light on the slot will be illumi-
nated and the lowest number of empty
slot will blink on the display.
After "WAIT" is displayed on the LCD,
the slot will open with "LOAD" dis-
played on the LCD.
3. Insert a disc partway into the slot, label
side up. The player will pull the disc in.
When the disc is inserted, the disc will
begin to play automatically.
NOTE :
o The disc can be only inserted while
the green light is blinking on the slot.
o This CD player is suitable only for 12
cm discs, do not use irregular shaped
CDs.
To insert multiple discs do the followings:
1. Press and hold the LOAD button for
one second or more.
You will then hear a beep sound and
the green light on the slot will be illu-
minated, and the numbers of empty
disc will blink on the display.
2. After "WAIT" is displayed on the LCD
with the lowest number of empty slot
blinking, the slot will open with "LOAD"
displayed on the LCD.
3. Insert a disc partway into the slot, label
side up. The player will pull the disc in.
Once the disc is loaded, the numbers
of the empty disc will blink on the
display continuously.
If the next "DISC NO." is displayed
when the slot is illuminated, you can
then load another disc.
4. Load the remaining disc by following
the same procedures 1 and 2. When
you finished loading 6 discs, the CD
player will begin to play the last CD
loaded.
5. To load more than one disc but less
than six, complete Steps 1 and 2.
FEATURES OF YOUR HYUNDAI
When you have finished loading discs,
press LOAD button to cancel the loading
function or wait for 10 seconds. The CD
player will begin to play the last CD loaded.
As each CD starts to play, the DISC num-
ber will appear on the display.
NOTE :
The disc player takes up to six discs. Do
not try to load more than six.
2. CD Button
o Press the CD Button to start CD play-
back, during radio operation or cas-
sette tape playing.
o When discs are in the CD deck, if you
press the CD button, the CD player will
begin playing even if the radio or cas-
sette player is being used.
o The CD player can be used when the
ignition switch is in either the "ON" or
"ACC" position.
o Push the CD button to start CD play-
back without pushing Power ON-OFF
control knob. (Only when a CD is in the
deck).
1
145
145

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents