Hood Release - Hyundai 2004 Elantra Owner's Manual

HOOD RELEASE

B570A02E-AAT
1. Pull the release knob to unlatch the hood.
2. Pull the secondary catch lever up and lift the
hood.
3. Hold the hood open with the support rod.
Before closing the hood, return the support rod
to its clip to prevent it from rattling. Lower the
hood until it is about 1 ft. (30 cm) above the
closed position and let it drop. Make sure that it
locks into place.
!
CAUTION:
Make sure that the support rod has been
released prior to closing the hood.
HXD570
!
WARNING:
o Always double check to be sure that the
hood is firmly latched before driving
away. If it is not latched, the hood could
fly open while the vehicle is being driven,
causing a total loss of visibility, which
might result in an accident.
o The support rod must be inserted com-
pletely into the hole provided in the
hood whenever you inspect the engine
compartment. This will prevent the hood
from falling and possibly injuring you.
o Do not move the vehicle with the hood
in the raised position, as vision is ob-
HXDFL570-A
structed and the hood could fall or be
damaged.
FEATURES OF YOUR HYUNDAI
B990A03Y-AAT
FLOOR MAT ANCHOR
To use a floor mat on the front floor carpet, make
sure it attaches to the floor mat anchor in your
vehicle. This keeps the floor mat from sliding
forward.
1
71
HXGS263