Environmental Information - Flymo Hover Compact Original Instructions Manual

Hide thumbs Also See for Hover Compact:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 7
-
before touching the blade (ensure the blade has
come to a complete stop);
-
before leaving the product unattended for any period;
-
before clearing a blockage;
-
before checking, cleaning or working on the appliance;
-
if you hit an object. Do not use your product until
you are sure that the entire product is in a safe
operating condition.;
-
if the product starts to vibrate abnormally. Check
immediately. Excessive vibration can cause injury.
Maintenance and storage
1. Caution: Do not touch rotating blade(s)
2. Keep all nuts, bolts and screws tight to be sure the
product is in safe working condition.
3. Check the grassbox frequently for wear or
deterioration.
Your product is uniquely identified by a silver and black product rating label.
We strongly recommend that your product is serviced at least every twelve months, more often in a
professional application.
Husqvarna UK Ltd products are manufactured under an
Environmental Management System (ISO 14001)
using, where practical, components manufactured in the
most environmentally responsible manner, according to
company procedures, and with the potential for recycling
at the end of the productsʼ life.
• Packaging is recyclable and plastic components have
been labelled (where practical) for categorised
recycling.
• Awareness of the environment must be considered
when disposing of ʻend-of-lifeʼ product.
• If necessary, contact your local authority for disposal
information.
If any part is found to be defective due to faulty
manufacture within the guarantee period, Husqvarna UK
Ltd., through its Authorised Service Repairers will effect
the repair or replacement to the customer free of charge
providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty
adjustment by the user.
(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired,
taken apart or tampered with by any person not
authorised by Husqvarna UK Ltd..
(f) The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*
This guarantee is additional to, and in no way
diminishes the customers statutory rights.
Failures due to the following are not covered, therefore it
is important that you read the instructions contained in
this Operator's Manual and understand how to operate
and maintain your machine:
Safety Precautions
4. Replace worn or damaged parts for safety.
5. Only use the replacement blade and blade bolt
6. Be careful during adjustment of the product to
7. Renew your metal blade after 50 hours mowing or 2
8. If, during the life of the product, the belt begins to slip,
9. Store in a cool dry place and out of reach of children.
10. Allow the product to cool for atleast 30 minutes
Service Recomendations

Environmental Information

The symbol
indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative
consequences for the environment and human health,
which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information
about recycling of this product, please contact your local
council office, your household waste disposal service or the
shop where you purchased the product.
Guarantee and Guarantee Policy
Failures not covered by guarantee
*
*
*
*
*
*
ENGLISH - 2
specified for this product.
prevent entrapment of the fingers between moving
blades and fixed parts of the machine.
years whichever is the sooner - regardless of condition.
return the product to an Authorised Service Dealer for
maintenance.
Do not store outdoors.
before storing.
on the product or on its packaging
Failures as a result of not reporting an initial fault.
Failures as a result of sudden impact.
Failures as a result of not using the product in
accordance with the instructions and recommendations
contained in this Operator's Manual.
Machines used for hire are not covered by this
guarantee.
The following items listed are considered as wearing
parts and their life is dependent on regular maintenance
and are, therefore not normally subject to a valid
warranty claim: Blades, Electric Mains cable
Caution!
Husqvarna UK Ltd. does not accept liability under the
warranty for defects caused in whole or part, directly or
indirectly by the fitting of replacement parts or additional
parts that are not either manufactured or approved by
Husqvarna UK Ltd., or by the machine having been
modified in any way.

Advertisement

Table of Contents
loading

Table of Contents