Setting Cruise Control - GMC 2009 Envoy Denali Owner's Manual

9 (Off): Turns the cruise control system off and
cancels the set speed memory.
R
(On): Turns the cruise control system on.
S
(Resume/Accelerate): Resume a set speed or to
accelerate.
T
(Set): Press this button, located at the end of the
lever, to set a speed.
The cruise controls are
located on the end of the
turn signal/multifunction
lever.
CAUTION:
{
If you leave your cruise control on when you are
not using cruise, you might hit a button and go
into cruise when you do not want to. You could be
startled and even lose control. Keep the cruise
control switch off until you want to use cruise
control.

Setting Cruise Control

1. Move the cruise control switch to
2. Get up to the desired speed.
T
3. Press at the end of the lever and release it.
4. Take your foot off the accelerator pedal.
R
.
Some vehicles have a
cruise light on the
instrument panel cluster
that will come on when the
cruise control is engaged.
3-11