Setting Cruise Control; Adaptive Cruise Control - GMC YUKON 2018 Getting To Know Your

CRUISE CONTROL

Setting Cruise Control

On/Off button. The
1. Press the
instrument cluster.
2. When traveling at the desired speed, press the SET– button to set the speed. The
will illuminate in green on the instrument cluster.
Adjusting Cruise Control
RES+ Resume/Accelerate
Press to resume a set speed.
When the system is active, press once to
increase speed 1 mph; press and hold to
continue increasing speed.
SET– Set/Coast
When the system is active, press once to
decrease speed 1 mph; press and hold to
continue decreasing speed.
Cancel
Press to cancel the cruise control without erasing the set speed from memory.
Pressing the brake pedal also will cancel the cruise control.
The set speed is erased when cruise control or the vehicle ignition is turned off.

Adaptive Cruise Control

Adaptive Cruise Control enhances traditional cruise control by maintaining a driver-selected
following gap between your vehicle and a vehicle detected directly ahead. Once a speed is set,
the vehicle will maintain the selected gap distance by braking or accelerating.
When a slower vehicle is detected ahead, the
vehicle brakes moderately to maintain the selected following gap. If driver action is required,
a visual alert flashes on the windshield and the Safety Alert Seat
selected).
Selecting the Following Gap
Follow Distance Gap button (also the Forward Collision Alert
Press the
left side of the steering wheel to set a following gap of Far, Medium or Near.
18 F
Optional equipment
Cruise Control symbol will illuminate in white on the
F
Vehicle Ahead symbol is displayed and the
pulses or beeps sound (if
F
See Driving and Operating in your Owner's Manual.
symbol
setting) on the
F