Vehicle Personalization; Memory Seat - GMC 2006 Yukon XL Owner's Manual

Vehicle Personalization

In addition to the following features, your vehicle may
also have features that can be programmed through
the Driver Information Center (DIC). See DIC Vehicle
Customization on page 3-67 for more information.

Memory Seat

These buttons are used to program and recall memory
settings for the driver's seat, both the driver's and
passenger's outside mirrors, and the throttle and brake
pedals for vehicles with the adjustable throttle and
brake pedal feature. The settings for these features
can be saved for up to two drivers.
2-62
If your vehicle has this
feature, the controls for
the memory function
are located on the
driver's door.
To store the memory settings, do the following:
1. While the vehicle is in PARK (P), adjust the driver's
seat, including the seatback recliner, lumbar, and
side wing area if your vehicle has this feature, both
of the outside mirrors, and the throttle and brake
pedals to your preference.
2. Press and hold the 1 or 2 button of the memory
control for three seconds. A double chime will
sound to let you know that the position has
been stored.
To repeat the procedure for a second driver, follow
the preceding steps, but press the other numbered
memory control button.
Each time button 1 or 2 is pressed and released while
the vehicle is in PARK (P), a single chime will sound
and the memory position will be recalled.
To stop recall movement of the memory seat feature at
any time, press one of the memory buttons or power
seat controls.