Qtx PAL8 User Manual

Qtx PAL8 User Manual

Portable pa unit with led light show
Hide thumbs Also See for PAL8:

Advertisement

PAL8, PAL10
Portable PA Unit with LED Light Show
Order ref: 178.860UK, 178.861UK
User Manual
VERSION 1.1

Advertisement

Table of Contents
loading

Summary of Contents for Qtx PAL8

  • Page 1 PAL8, PAL10 Portable PA Unit with LED Light Show Order ref: 178.860UK, 178.861UK User Manual VERSION 1.1...
  • Page 2: Package Contents

    Caution: Please read this manual carefully before operating Damage caused by misuse is not covered by the warranty Introduction Thank you for choosing a PAL SERIES portable home PA unit. This versatile portable PA unit is packed with features and includes a front speaker cone which doubles as an LED light show for a complete and compact entertainment system.
  • Page 3: Rear Panel

    Rear Panel Media player display USB port SD/MMC card slot Media player mode Media player repeat play setting VHF microphone volume VHF microphone antenna Battery status LEDs Power LED Charging LED Front LED lights power on/off 12Vdc power input terminals Media player USB/SD source select Previous track (hold for seek) Next track (hold for seek)
  • Page 4: External Inputs

    Setting up When powered up, BASS and TREBLE controls (19, 20) should remain pointing vertically (i.e. 12-o-clock position). Turn up the MASTER VOLUME control (18) part way. You may decide to activate the LED light show on your PAL SERIES unit by moving the LED power switch (11) to the “on”...
  • Page 5: Internal Media Player

    Internal media player The PAL SERIES unit has an internal media player for digital audio playback from USB/SD/MMC media, FM tuner or via Bluetooth. Press ‘Mode’ (4) to select the function you require - USB, SD, FM radio or Bluetooth. ...
  • Page 6: Bluetooth Connection

    Bluetooth™ Connection  On the media player, select ‘ ’ using the mode button (4). Scan for Bluetooth devices on your smart phone or other Bluetooth enabled audio player and check for a device called ‘PAL SERIES’. Select this device and opt to connect your Bluetooth device, which should then state that it is connected to “PAL SERIES”...
  • Page 7: Specifications

    Specifications Model PAL8 PAL10 Output power 30Wrms 35Wrms Main driver 200mm (8“) 250mm (10”) Power supply 13.5A, 2A adaptor (included) or internal battery Battery - main unit Rechargeable 11.1V, 1800mAh Li-ion Batteries – VHF mic. 2 x AA HF driver 25mm (1“)
  • Page 8: Troubleshooting

    Troubleshooting Check POWER switch is on No output and no LEDs lit Check battery is not drained fully If battery is flat, connect mains power adaptor Check AA batteries in wireless microphone Power LED lit but no VHF Check wireless microphone is switched on output Check VHF MIC VOL is not turned down Power LED lit but no USB/SD...

This manual is also suitable for:

Pal10

Table of Contents