Table of Contents
Advertisement
8.2
SD CARD
-
Locate the UPD-z3-mve02-v1.04.00.img file on your Z3 Server user account
-
Place SD card into computer
-
Open the zwriter.exe windows program (provided by Z3)
-
Select the UPD-z3-mve02-v1.04.00.img file
-
Select correct location for your SD card Do NOT make mistake on this item. This will cause wherever
you are writing to be overwritten.
-
Eject SD card from computer
-
Place in SD card socket of APP board
-
Power on system with terminal output connected to PC
-
You will see the system updating the flash
-
Once complete, the system will boot.
-
Power off unit
-
Remove SD card
-
Power cycle system for clean boot and system should be updated.
Z3 Technology, LLC ♦ 4701 Innovation Drive CB103 ♦ Lincoln, NE 68521 USA ♦ +1.402.323.0702
CONFIDENTIAL
There is no recovery once you hit "Write Device"
MVE-02-V1.04.00 RELEASE
8
Advertisement
Table of Contents
