Replacement Bulbs - GMC 2005 Canyon Owner's Manual

Hide thumbs Also See for 2005 Canyon:

Table of Contents

3. Pull out the lamp assembly.

4. Turn the bulb socket counterclockwise to remove it

from the taillamp housing.

5. Pull the old bulb straight out from the socket.

6. Press a new bulb into the socket and turn the socket

clockwise into the taillamp housing until it is tight.

7. Reinstall the rear lamp assembly and tighten the

8. Close the tailgate.

2. Remove the two rear

lamp assembly screws

near the tailgate latch.

Replacement Bulbs

Exterior Lamp

Center High-Mounted

Stoplamp (CHMSL)

Composite High-Beam

Composite Low-Beam

Parking/Front Turn Signal/Daytime

Running Lamp (DRL)

Parking Lamp (Inboard)

Stoplamp, Rear Turn Signal,

Taillamp, and Back-Up Lamp

For replacement bulbs not listed here, contact your

Table of Contents