Turn Signal/Multifunction Lever; Turn And Lane Change Signals - GMC 2004 Yukon XL Owner's Manual

Turn Signal/Multifunction Lever

The lever on the left side of the steering column
includes the following:
•

Turn and Lane Change Signals

•
Headlamp High/Low-Beam Changer
•
Flash-to-Pass
•
Windshield Wipers
•
Windshield Washer
•
Cruise Control
For information on the exterior lamps, see Exterior
Lamps on page 3-14.
3-8
Turn and Lane Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up or
down. When the turn is finished, the lever will return
automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
As you signal a turn or a lane change, if the arrows flash
more quickly than normal, a signal bulb may be burned
out and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you signal
a turn, check for burned-out bulbs and a blown fuse.
See Fuses and Circuit Breakers on page 5-115.
An arrow on the instrument
panel cluster will flash in
the direction of the
turn or lane change.