Audio Steering Wheel Controls - GMC 2004 Yukon XL Owner's Manual

Audio Steering Wheel Controls

Some audio controls can be adjusted at the steering
wheel. They include the following:
g
(OnStar/Voice Recognition): If your vehicle has
®
OnStar , press this button to interact with the OnStar
system. See the OnStar
vehicle for more information.
If your vehicle does not have OnStar
to silence the system. Press it again, or any other
radio button, to turn on the sound.
®
manual provided with your
®
, press this button
PROG (Program): Press this button to play a station
you have programmed on the radio preset pushbuttons.
The radio will only seek preset stations with a strong
signal that are in the selected band.
When a cassette tape is playing, press this button to
play the other side of the tape.
When a CD is playing in the CD changer, press this
button to go to the next available CD, if multiple CDs
are loaded.
Q R
SOURCE
FM1, FM2, AM, or XM1 or XM2 (if equipped), or a
cassette tape or CD. The cassette or CD must be loaded
to play. Available loaded sources are shown on the
display as a tape or a CD symbol.
Q R
SEEK : Press the up or the down arrow to go to
®
the next or to the previous radio station and stay
there. The radio will only seek stations with a strong
signal that are in the selected band.
When a cassette tape or CD is playing, press the up or
the down arrow to fast forward or reverse.
Q R
VOL (Volume): Press the up or the down arrow
to increase or to decrease the volume.
: Press this button to switch between
3-137