Explanation Of Symbols - PEP CP351 Manual

CP351

Explanation of Symbols

CE Conformity
This symbol indicates that the item described in this manual
is in compliance with all applied CE standards. See also the
section "Applied standards" of this manual.
Caution!
This symbol and title warn you of hazards due to electrical
shocks (> 60 V) when touching products or parts of them.
The non-observance of the measures indicated and/or pre-
scribed by the law may cause harm to your product and/or
life/health.
See also the section "High Voltage Safety Instructions".
ESD-Sensitive Device!
This symbol and title inform you that electronic boards and
their components are sensitive to static electricity. There-
fore, care must be taken during all handling operations and
inspections of this product, in order to ensure product integ-
rity at all times.
Please read also the section "Special Handling and Unpack-
ing Instructions" of this manual.
Attention!
!
This symbol and title emphasize aspects which, if not read
through carefully by the reader, might cause hazards to
health and/or damages to material.
$
Note:
This symbol and title emphasize aspects the reader should
read through carefully for his or her own advantage.
PEP Advantage
This symbol and title emphasize advantages or positive
aspects of a product and/or procedure.
Troubleshooting
This symbol and title characterize a message containing
useful information on troubleshooting and problem solving.
ID 18983, Rev. 0101 ® PEP Modular Computers GmbH
Preface
Page 0 - 5