Turn And Lane Change Signals - GMC 2002 Envoy Owner's Manual

Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes the following:
D

: Turn and Lane Change Signals

D
: Headlamp High/Low
D
- -
Flash to Pass Feature
D
: Windshield Wipers
D
: Windshield Washer
D
: Cruise Control
2-38
-
Beam Changer
Turn and Lane Change Signals
The turn signal has two upward (for right) and two
downward (for left) positions. These positions allow you
to signal a turn or a lane change.
To signal a turn, move the lever all the way up
or down. When the turn is finished, the lever will
return automatically.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by
itself when you release it. The bottom of the outside
rearview mirrors may also be equipped with lane
change indicators.
As you signal a turn or a lane change, if the arrows flash
more quickly than normal, a signal bulb may be burned
out and other drivers won't see your turn signal.
An arrow on the instrument
panel cluster will flash in
the direction of the turn or
lane change.