Advertisement
Follow this diagram to store the underbody-mounted spare.
Retainer
Valve Stem
(Pointed Down)
Spare or Flat Tire
Spring
Wheel Wrench
"3
- 1 -
b
E
Lower
G. Raise
I
B J
I
H. Hoist Arm
1. Put the tire on the ground at the rear of
the vehicle,
with the valve stem pointed down and to the rear.
2. Pull the retainer through the wheel.
3. Put the chisel end of the wheel wrench,
on
an angle,
through the hole in the rear bumper and into the hoist
shaft. Turn the wheel wrench to the right until the
tire is raised against the underside of the vehicle.
You will hear two "clicks" when the tire is secure,
but pull on the tire to make sure.
Return the jack, wheel wrench and wheel blocks to the
proper location in your vehicle's rear area. Secure the
items and replace the jack cover.
5-30
Advertisement
