Advertisement
/I\
CAUTION:
Never use oil or grease on studs or nuts. If you
do, the nuts might come loose. Your wheel could
fall off, causing a serious accident.
7. Place the spare on the wheel mounting surface.
8. Put the nuts on by hand.
Make sure the
cone-shaped end is
toward the wheel.
Tighten each nut by hand
until the wheel is held
against the hub. If a nut
can't be turned by hand,
use the wheel wrench and
see your dealer as soon
as possible.
9. Lower the vehicle by turning the jack handle to the
left. Lower the jack completely.
5-28
Advertisement
