Care Of Safety Belts - GMC 1997 Jimmy Owner's Manual

Table of Contents

Advertisement

Cleaning Vinyl
Use warm water and
a
clean cloth.
Rub with a clean, damp cloth to remove dirt. You
may have to do
it
more than once.
Things like tar, asphalt and shoe polish will stain if you
don't get then1 off quickly. Use
a
clean cloth and
a
vinyl/leatlm- cleaner. See your dealer for this product.
Cleaning Leather
Use
a
soft cloth with lukewarm water and a mild soap or
saddle soap and wipe dry with a soft cloth. Then, let the
leather dry naturally. Do not me heat
t o
dry.
0
For stubborn stains, use a leather cleaner. See your
dealer for this product.
Nel1L.r
use
oils. varnishes, solvent-based or Ltbrasive
cleaners, furniture polish or shoe polish on leather.
Soiled or stained leather should be cleaned
immediately. If dirt is allowed to work into the
finish, it
can harm
the
leather.
Cleaning the Top of the Instrument Panel
Use only mild soap and water to clean the top surfaces
of the instrument panel. Sprays containing silicones or
waxes may cause annoying retlections in the windshield
and even make i t difficult to see through the windshield
under certain conditions.
C-are of Safet.y Belts
Keep belts clean and dry.
I
r
Do not bleach or dye safety belts. If you do, it
may severely weaken them. In a crash, they
might not be able to provide adequate protection.
Clean safety belts only with mild soap and
lukewarm water.
6-52

Advertisement

Table of Contents
loading

Table of Contents